COVID-19 poses a bunch of challenges for the world right now and we must all work together to help by following World Health Organisations and your own government's guidelines.
More information is available on the World Health Organisation website here https://www.who.int/
Xcalibre are proud to know that our equipment is used and trusted in the telecommunications, construction & aviation industries to support national infrastructure.
Our Drill motor spacers are designed to help you achieve larger drilling diameters whilst core sampling or for when producing larger diameter holes when drilling. Moving the focus or the centre of the circle further out, increases the clearance safely from the machine which then allows larger diamond core barrels to used. We wouldn't recommend using anymore than a 75mm and a 150mm spacer together.
Drill motor spacer kit options
All kits come ready with keyways and fasteners
 Drill motor spacer 75mm kit (maxium ø450) [AG1]
 Drill motor spacer 100mm kit (max ø500) [AG2]
 Drill motor spacer 150mm kit (max ø600) [AG3]
If you have a requirement please feel free to contact us here.
Our Magnum hydraulic hand held core drills provide unrivalled power for both wet & dry drilling applications and are considered to be one of the worlds most powerful hand held hydraulic core drill range.
Despite their power there is little or no kick or snatch due to the in-built pressure / torque limiting valve.
Four sizes of unit available.
- Very low maintenance, no fragile electrical components and no electric motor burn-outs.
- Low noise and high performance with increased diamond core bit life.
- Hydraulic operation allows the unit to be used in underwater applications.
- Quiet and spark free operation makes the Magnum ideal for use in hazardous environments.
Maximum input pressure is 150 bar / Optimum input flow 20 l/min.
When using hydraulic supplies in excess of 20 l/min & 150 bar please use Xcalibre pressure & flow limiting FPC valve (Part number 80803420)
The noise levels have been measured at 83 Db @ 1 metre which is as little is quieter than many electric drills, thus making the Magnum ideal for operating inside occupied buildings and safer for the operator.
With no electrical components the Magnum is spark free making it an ideal tool for working in confined spaces where there might be a gas hazard or for example, on petrochemical sites
8 Kgs (Excluding hoses, core barrel & drill adaptor)
Hand/Arm Vibration free running only 0.6m/sec r.m.s
Magnum below attached to one of our DS140 Drill stands
The Magnum and hydraulic hoses are sealed and impervious to the effects of water making this drill ideal for inverted wet drilling or under water drilling.
There are a host of examples of the Magnum being used under water, the hydraulic power packs are parked on a barge or structure above the water and the hoses are dropped down to the under water drilling position. The Magnum has been used for example, to drill fixing holes on pier refurbishment and on oil extraction structures. When drilling larger diameter holes under water it is advisable to mount the Magnum on a drill stand bolted to the structure - divers find it difficult to apply pressure to a drill because of the effects of buoyancy and currents. Despite being under water, water flushing is still required for the diamond drilling process to clear away the abraded material from the cutting face.
8200 LED lights and 1300km of cabling was installed in just 80 days with the help of Xcalibre's T1 Neptune and core drill bits.
The airport was able to remain opperational during the entire operation.
Xcalibre also provided training to machine operators so equipment can be used safely and effectively.
The Second Severn Crossing is the M4 motorway bridge over the River Severn between England and Wales. The bridge marks the lower limit of the River Severn and the start of the Severn Estuary.
The total length is 5,128 metres (16,824 ft).
Xcalibre provided the equipment to drill the 19,000 holes for the crash barrier installation.