T4 parts

Wet core drill bit adaptor size 1.1/4 UNC-M x 1.1/4 UNC-M 

Rotating beacon for all of our machines fitted with a beacon pole. HIGHWAY ECE  R 65 or AIRPORT ICAO CAP168 

These allow for further spacing between the hyrdauclic drill motor and the machine, used for achieving larger diameters when coring and are suitable for one and two speed drill motors. Designed and manufactured here at Xcalibre Equipment we provide different size spacers for coring. Each kit contains the spacer keys & fastener kit and we have 75mm, 100mm and 150mm Kits availble.    

Replacement coupling rubber gaiter bellows for T3 and T4 machines

Available in 7M or 14M lengths and comes complete with quick release cuplings / connectors.

Remote pendant handset for T4 T5 only which helps control the machine from a safe distance. As a security feature the machine will not start or operate without the handset being plugged in.  Although tough and rugged in design, we recommend looking after this key piece of the machine, storing it safely when not in use. A machine handset holder kit is availble. Handset Parking Braket CB1 [71000711]

Drilling safety guard which is designed to protect the operator when the machine is in use. This kit contains the drill guard, guard stays and the fasteners.  Only a small amount of assembly with the guard stays maybe required. When the guard is in place the maximum barrel diameter you can use is 350mm Not designed for the T4L with is lateral movement.