T3 parts

Display: List / Grid
Show:
Sort By:
610 Drill Drive Adaptor XE50 [14006501]
Wet core drill bit adaptor size 1.1/4 UNC-M x 1.1/4 UNC-M 
Beacon [26002211]
Rotating beacon for all of our machines fitted with a beacon pole. HIGHWAY ECE  R 65 or AIRPORT ICAO CAP168 
Drill motor spacers
These allow for further spacing between the hyrdauclic drill motor and the machine, used for achieving larger diameters when coring and are suitable for one and two speed drill motors. Designed and manufactured here at Xcalibre Equipment we provide different size spacers for coring. Each kit contains the spacer keys & fastener kit and we have 75mm, 100mm and 150mm Kits availble.    
Hydraulic Extension Hose 1/2"
Available in 7M or 14M lengths and comes complete with quick release cuplings / connectors.
WATER SWIVEL XE50 [71001211]
Water Swivel with high pressure water shaft and seals for single speed and two speed motors. Suitable for T1, T3, T4 and T5 Coring trailers.
Water tank filter basket [28001081]
Water tank filter for all of coring trailer. Designed to prevent any contamination, debris or anthing else entering your water tank. 
Water tank lid [28001086]
Plastic water tank lid for all of our coring trailers. 
LH 11 Hydraulic Pick Hammer
Perfectly suited for our machines fitted with a PTO. An ideal lightweight hammer / tamper both for surface and underwater work, this D-handle hammer is perfect for horizontal work in asphalt, brick, mortar and light work in concrete. This high quality equipment is one of the most powerful pick hammers on the market. With its detachable front handle, the LH 11 is a popular choice for tamping coldmix bitumen/asphalt back into holes left after core sampling or use as a breaker for demolition jobs. Click here for tamper pads and stems
Extension Bars
Hexagon extension bars for deeper drilling. Multiple extension bars can be used at the same time to help reach your target drilling depth. 100mm, 200mm and 300mm ½" BSP thread sizes are lighter and suitable for use with the Magnum hydraulic core drill 1/1/4" BSP sizes are designed for larger machines like our core drill trailers, and can be used with the Magnum. Extension bars  
610 Drill Drive Adaptor XE50 [14006501]
Wet core drill bit adaptor size 1.1/4 UNC-M x 1.1/4 UNC-M 
Beacon [26002211]
Rotating beacon for all of our machines fitted with a beacon pole. HIGHWAY ECE  R 65 or AIRPORT ICAO CAP168 
Drill motor spacers
These allow for further spacing between the hyrdauclic drill motor and the machine, used for achieving larger diameters when coring and are suitable for one and two speed drill motors. Designed and manufactured here at Xcalibre Equipment we provide different size spacers for coring. Each kit contains the spacer keys & fastener kit and we have 75mm, 100mm and 150mm Kits availble.    
Hydraulic Extension Hose 1/2"
Available in 7M or 14M lengths and comes complete with quick release cuplings / connectors.
WATER SWIVEL XE50 [71001211]
Water Swivel with high pressure water shaft and seals for single speed and two speed motors. Suitable for T1, T3, T4 and T5 Coring trailers.
Water tank filter basket [28001081]
Water tank filter for all of coring trailer. Designed to prevent any contamination, debris or anthing else entering your water tank. 
Water tank lid [28001086]
Plastic water tank lid for all of our coring trailers. 
LH 11 Hydraulic Pick Hammer
Perfectly suited for our machines fitted with a PTO. An ideal lightweight hammer / tamper both for surface and underwater work, this D-handle hammer is perfect for horizontal work in asphalt, brick, mortar and light work in concrete. This high quality equipment is one of the most powerful pick hammers on the market. With its detachable front handle, the LH 11 is a popular choice for tamping coldmix bitumen/asphalt back into holes left after core sampling or use as a breaker for demolition jobs. Click here for tamper pads and stems
Extension Bars
Hexagon extension bars for deeper drilling. Multiple extension bars can be used at the same time to help reach your target drilling depth. 100mm, 200mm and 300mm ½" BSP thread sizes are lighter and suitable for use with the Magnum hydraulic core drill 1/1/4" BSP sizes are designed for larger machines like our core drill trailers, and can be used with the Magnum. Extension bars