Tamper pads and stems
Xcalibre design and manufacture some sizes that were simply not available anywhere in the marketplace. (100mm & 150mm tamper pad)
Suitable for the popular LH11 pick hammer or for use with any other breaker/tamper that can fit a 22mm Hexagon.
In our industry tamper pads are used for good groundcare back filling of holes after coring or drilling, sometimes requiring tamper pads of specific diameters,
Tamper pad diameters 100mm (4") 125mm (5") 150mm (6") 175mm (7") 200mm (8")
Sometimes refered to by some countries as an elephants foot or rammer pad.
 LH 11 Tamper shaft hexagon is 22mm AF hexagon (7/8" AF hexagon) x 82.5mm long and the stem is 320mm overall length.
 Tamper shaft hexagon 25.4mm AF hexagon (1" AF hexagon) x 108mm (4.1/4") long and the stem is 400mm overall length (not suitable for the LH11)
 Tamper shaft hexagon 32mm AF hexagon (1.1/4" AF hexagon) x 235mm (not suitable for the LH11)