Drill Stand DS140
80602116
The Xcalibre Diamond Drill Stand is the result of extensive research and field trials within the contracting hand hire industries. The Diamond Drill Stand is suitable for use with hydraulic, electric or air motors. This lightweight yet robust unit provides many novel features and benefits which overcome the problems identified with other drill stands. The DS140 can be used underwater in fresh or salt water due to its robust design and construction. Stainless steel bearings for example. We highly recommend fully cleaning the stand after being submerged.
Photo shown is DS140 with a mounting collar attached Mounting Collar [80802216]
Quick release system
Benefits & Features
- Optional quick release system for rapid change of drill motor
- 200mm diameter barrels as standard
- Adjustable for angled drilling up to 60 degrees
- Drill travel up to 650mm
- Levelling screw system
- Can be used in underwater submersible applications when using a hydraulic motor only.
- Photo shown is DS140 with a mounting collar attached Mounting Collar [80802216]
Drill diameter | Ø200mm as standard Spacer Blocks required for larger diameters8" as standard Spacer Blocks required for larger diameters |
Drill travel | up to 650mmup to 26" |
Angling | Adjustable for angled drilling up to 60 degrees |
Weight (without drill motor) | 17 kgs excluding drill motor37lbs excluding drill motor |
Use with Xcalibre Equipment
- Electra range of power packs
- XE50 Water Swivel
- XE25 Water Swivel
- Magnum Hydraulic Core Drill
- Levelling screw system